Vortex Optics has maintained an excellent reputation throughout the past few years by manufacturing a wide range of high quality binoculars for the people in need.
Vortex Razor HD 10×50 Binocular can be considered as the latest addition to their lineup. These binoculars come along with fully multicoated lenses that have the ability to enhance light transmission with the help of anti-reflective coatings that can be seen on the air-to-glass surfaces.
In addition, the developers have used extra low dispersion glasses and high density prisms inside these binoculars in order to deliver the best visual experience to the users.
How good is the Vortex Razon HD 10×50 binocular?
The latest Vortex Razor binoculars come along with a simple roof prism design. This new design has helped the developers to give life to a sleeker, smaller and more appealing binocular.
The predecessor of Vortex Razor had the open bridge look and it was over 30oz. However, these new binoculars weighs only about 26oz. and you will be able to carry them from one place to another without much hassle.
The Vortex Razor binoculars can be purchased in two different models as 8*42 and 10*42. The latter version weighs about 26.7 oz. These measurements have been taken with the weight of rain guard and lens covers.
The magnesium chassis has played a major role behind the low weight of these binoculars. It is better than the traditional aluminum frame because users can experience enhanced durability and strength along with a lower weight. As a result, many companies in the modern world prefer to include magnesium in the construction of their binoculars.
The previous version of Vortex Razor binoculars had a black rubber armoring. It has been changed into a natural green, clad in a thinner armoring and the developers have included black and gray accents to it. The barrels of the binocular are well placed and you will be able to find shallow thumb pads on the rear side.
You don’t need to have big hands in order to hold these binoculars in a comfortable way. It is 4.9 inches wide and 6.25 inches tall. Like all the other high end roof prism binoculars, the Vortex Razor binoculars are vacuum sealed and have internal fog proof and waterproof properties.Check out how much you can save on this binocular.
Glass and Coatings
The glass and coatings can be considered as one of the major improvements that can be seen in Vortex Razor binoculars. They have the potential to deliver a better image quality than all the predecessors, which were made with HD glass lenses.
They have improved the coating of glasses in order to offer better quality images. In fact, they are phase-coated and multicoated. The multicoated glasses have increased light transmission while reducing the degrading reflections. This can enhance the overall brightness of images.
The prisms are made out of BaK-4 glasses, which have been used in almost all the high end binoculars that are available in the market nowadays. The folks at Vortex have also included a dielectric coating to the faces of prism in order to deliver the best vivid image colors. Since the prism faces are phase coated, incoming light rays with different wavelengths will be focused on the same plane.
Last but not least, you can find an ArmorTek coating on the lenses of these binoculars, which repel salts and oils while reducing the tendency of dust to adhere on them. This will assist you during the cleaning process of lenses.
You can experience an impressive field view of 388 feet at 1000 yards on 8*42 model and 362 feet at 1000 yards on 10*42 model.
The eye relief of these two models are 17.5mm and 16.5mm respectively. The overall optical performance has played a major role behind the popularity of these binoculars.
The Vortex Razor binoculars have been popular for minimum close focus since their origin. They have continued the tradition in these binoculars as well. You will be able to focus at just 5 feet and get a better view of the field.
The focusing process can be done with the help of focus knob in a smooth and friendly manner. In other words, focusing is just a snap with Vortex Razor binoculars. They also give a tough competition to the most expensive binoculars out there with edge performance and field curvature. Since this is an HD glass binocular, you can expect chromatic aberration as well. However, the depth of field in these binoculars are not exceptional.
You can adjust the eyecups of these binoculars with standard helical twist mechanism. In other words, a clockwise twist will collapse them and vice versa. You can find two completely stable positions that are marked with firm detents.
You can also notice a slightly tapered rim on the soft rubber of eyecups. This will cater your comfort needs once the binoculars are pressed against the face.
In addition, you can find a twist ring that is located near the upper right barrel, which facilitates dioptric adjustment. This twist ring automatically locks when you are not using it. If you need to allow the tube to twist freely, you just need to pull the ring up away.
The scale relative adjustment that can be found on the ocular tube and ring will show position for equal eyes while giving an indication about the settings.
The rain guard of these binoculars are designed as pliable rubber cups with a depth of two inches. A standard strap is fixed to the bracket that is located on the side of the binocular. This will enhance the safety of your binocular by preventing accidental drops on the field. You can also go for a wide range of optical accessories depending on your specific needs and requirements.
If you are looking to purchase a high end binocular, you can think about going for Vortex Razor binoculars without any doubt on mind. It offers a wide range of impressive features to the users at an affordable price tag.